DAVONE 丹麥手工喇叭
|
SoloFrequency response
30 - 30.000 Hz Impedance 4 ohm, 2.2 ohm minimum at 350Hz @ 10 degrees Sensitivity 89 dB/2,83V/m Max power 150W (IEC 268-5) Woofer 8” , Soft low damping rubber surround, geometrically reinforced aluminum cone, rigid die cast alu chassis with extensive venting Mid 4", low distortion driver with a special fibre blend cone with optimal balance of stiffness, damping and density Tweeter 29mm ring radiator, low distortion driver with non-reflective cast aluminium chamber, saturation controlled motor system with T-shaped pole, dual copper caps Cross over 200 Hz, 2kHz System Bass reflex/ Closed Cabinet 10 layer beech wood form pressed veneer with multiple internal stiffeners. Weight 30kg / piece Current version Værløse Studio A (VSA) |
RayFrequency response
37-30.000Hz Impedance 4 ohm, 4.0 ohm minimum at 37Hz Sensitivity 89dB/2,83V/m Max power 170 W measured according to IEC 17.1 Woofer 8” hard paper cone, Xmax 28mm peak-peak, Patented Symmetrical Drive Motor Design Mid 4", Proprietary cone material with the optimal balance of stiffnes, damping and density, strengthened with Egyptian papyrus fibers. Foam surround (made from polyether foam, not the the usual polyester foam which is infamous for it's short life time) for maximum transparency and midrange resolution. Tweeter 1" , wide surround silk dome diaphragm Cross over 400 Hz, 3kHz System Bass reflex/ Closed Cabinet 16 layer, 20mm thick beech wood form pressed veneer with multiple internal stiffeners. Driver placement in left and right cabinet is mirror imaged Weight 27 kg per piece including stand |